Friday 30 May 2014

Technics SE A5 Stereo Power Amplifier

Technics SE A5 Stereo Power Amplifier
1979

With the stereo power amplifiers Technics SE-A1/A3/A5 Technics offered in 1979 a completely new concept in the development of DC-circuit technique for power amplifiers.

The 19kg heavy " NewClassA " power amplifier provides 160 watts per channel and sounds amazing . The uncompromising clear design with front-filling power display instruments behind thick real glass fitted into a solid aluminum panel was successfully and copied by many manufacturers more or less.

16 Axial bulbs were installed in order to obtain a homogeneous illumination of the giant VU meter front. I have replaced the bulbs completely.

Technics has this model series from 1981 almost reissued in 12 months rhythm with cosmetically adjusted to every trend.

Today, after 35 years of Technics / Panasonic is still using this design for certain audio product lines. 





AKAI AP-002 Vintage Turntable

                             My AKAI AP-002 Vintage Turntable With AT-11 Cartridge




Thursday 29 May 2014

Pioneer SA608,TX608 set

                                            My Pioneer SA608,TX608 set





Technics SL-P550 Compact Disc Player

                              This Is My Technics SL-P550 Compact Disc Player from 1988
                                  This is last "right" Technics with BurrBrown 2 Dacs 18Bit
                                         Sound is very analog like,i like very much.

Specs:
18bit conversion,
2 x BurrBrown PCM56P-J – YM3404B dac / filter,
Panasonic SOAD60A transport / pickup,
Panasonic, Elna Cerafine, Nichicon Muse components,
remote,
S/N ≥ 105 dB,
dynamic range ≥ 98 dB,
channel separation ≥ 100 dB,
2–20000 Hz ± 0,3 dB,
harmonic distortion ≤ 0,004%,
mm 430x102x330, kg 3,1.

Some information here:
http://audio-database.com/TechnicsPanasonic/player/sl-p550-e.html

http://insidehifi.blogspot.com/2013/10/technics-sl-p550.html







Tuesday 27 May 2014

Pioneer HPM-700 Speakers

Pioneer HPM-700
The Pioneer HPM-700 is a high fidelity, 4-way, 4-speaker Bass-Reflex loudspeaker system designed by Bart Locanthi and his team of ex-JBL engineers, manufactured in Japan for the Pioneer Electronic Corporation from 1980 to 1983. Many still exist in complete working order, with all original parts, due to the speaker being engineered for endurance, reliability and longevity.

The HPM-900, were released along with the HPM-700. The HPM-700 was comparable to the HPM-60: a smaller HPM-900 with a 10 inch woofer. The tweeter and mid-range drivers on the HPM-900 and HPM-700 contained individual metal grills to protect the cones. These two speakers featured another new supertweeter design – one that more closely matched the 180 degree projection of the HPM-100. The woofers were constructed with graphite modulus – a stiffer composite material, and had foam surrounds. Also like the HPM-40 the cabinet was covered with vinyl instead of veneer


This Is my Pioneer HPM-700 speakers ,sounds very good,i want find Pioneer HPM-100 too


















HPM stands for “High Polymer Molecular”, in reference to its then newly-developed high polymer molecular film supertweeter, a design that is used to convert electrical energy into sound to a degree that had previously only been theory. It is damped by elastic materials to prevent the deterioration of its best characteristics, and eliminates excessive harmonic distortion. It is housed in a plastic case, with the film (and grille) shaped semi-cylindrically in order to project the sound all 180 degrees around the front of the speaker. The HPM super-tweeter design has no dome, magnet, voice coils, or any moving parts at all. The frequency response of this driver ranges up to 25 kHz, exceeding the capacity of the human ear.

Friday 23 May 2014

Technics SE A5 Stereo Power Amplifier 1979

With the stereo power amplifiers Technics SE-A1/A3/A5 Technics offered in 1979 a completely new concept in the development of DC-circuit technique for power amplifiers.
The 19kg heavy " NewClassA " power amplifier provides 160 watts per channel and sounds amazing . The uncompromising clear design with front-filling power display instruments behind thick real glass fitted into a solid aluminum panel was successfully and copied by many manufacturers more or less.

16 Axial bulbs were installed in order to obtain a homogeneous illumination of the giant VU meter front. I have the lamps replaced completely .
Technics has this model series from 1981 almost reissued in 12 months rhythm with cosmetically adjusted to every trend.
Today, after 35 years of Technics / Panasonic is still using this design for certain audio product lines. Now Panasonic is using cheap looking plastic glass surrounded by a mostly dark colored plastic front.

Thursday 15 May 2014

Transcriptors Hydraulic Reference Vintage Turntable

                                                         Great Job, Audiotweak.net !
Transcriptors Hydraulic Reference Turntable, SME3009 S2 improved fixed headshell, restored to museum standard.




History
David’s design concept was inspired by old clocks and watches from the 17th and 18th century. David had often asked this question many times over, why put something of engineering elegance into a black case or even worst, into a wooden case, that looked as if it had been made down in somebody’s garden shed. In fact Transcriptors started the trend to expose all the components so that they could be viewed from all angles. Manufactured from aluminum and acrylic to very high tolerances, tested, the end result always being a highly polished, highly accurate turntable. Designed and built with the skill of an 18th century clock maker, the turntables made for a very satisfying sight indeed.


http://audiotweak.net/2014/05/09/transcriptors-hydraulic-reference-vintage-turntable-wallpapers/

Wednesday 14 May 2014

LUXMAN L-501s Integrated Amplifier


http://audio-vintage.ru/index.php?a=item&id=85

The Integrated Amplifier of L series which introduced the technology developed with the high-end model.

In order to send out the stable energy to a speaker, the Oide power transistor and the large-sized heat sink are adopted.
Moreover, the efficient large-sized EI core power transformer and the mass capacitor excellent in the instant charge-and-discharge property were carried, and the effective output of 70W+70W has been obtained.

The high slew rate CSSC (Complementary Single Stagger Circuit) super-wide band amplifying circuit which was excellent in the instantaneous power of sound in the wide band is adopted as an amplifier circuitry.

ROM optical disk (Optimized Dual) beta circuit is carried.
It was used in order to secure the stability of the direct-current area of amplifier, but by the way of inserting DC servo amplifier etc. in a feedback loop, the feedback of general DC had become a cause by which the tones for every band differed in order to put in a process which is different only to DC area.
In L-501s, though the dependency to a corrective network is reduced by improving the nakedness property of a circuitry and a direct-current region and each alternating-current region are considered as another feedback, the unification of the tone covering the stability and all the play bands of a circuitry is realized, without using DC servo amplifier.

The STAR circuit original with a Lux is adopted, sharing of the feed line in a circuitry or an earth line is abandoned, and the loop which became independent, respectively consists of connecting the whole of each line with each block or a signal path directly from a reference point.
This removes the variation factor of the amplification reference point by the cross interferencee between each circuitry, or transition of the signal current, and the cleaner music play is aimed at.

Two lines are carried in the speaker terminal as a bi-wiring interconnection correspondence.
Moreover, the vice type screw type which holds a cable firmly is adopted, and the banana plug is also supported.

The input only for man month is carried and phone amplifier is built in.

The motor drive scheme is adopted as a volume and an input selector.

Functionalities, such as a loudness, a Subsonic Filter, a feather r eggplant control, a mono-switchpoint, and a tone control, are carried.
Moreover, the straight switchpoint is carried and a tone quality with a higher purity is obtained by making a signal path simple.

Phase-in barter is carried and a phase switching of a balance line (XLR) input is possible.

The line phase sensor is carried and a polar mandatory is possible.

Relay contact only for headphone was given to the headphone jack, and it has the headphone circuitry of another system with the output to a speaker termination.

A power switch, an input selector, volume control, and the remote control in which the fundamental operation of a muting is possible are attached.
Moreover, the bus line which interlocks the compact disk player made from LUXMAN and a remote control operation is also carried, and the operationality of a systemwide is raised. 

FormIntegrated amplifier
Succession runtime output70W+70W (8ohms)
THD
(Line straight on)
0.005% or less (8 ohms, 1kHz, both channel simultaneous drive)
0.03% or less (8 ohms, 20Hz - 20kHz, both channel simultaneous drive)
Input sensitivity/impedancePhono: 2.5mv/47kohm
Line, Recorder:150mV/47kohm
Bal.Line: 150mV/66kohm
Output voltageRecorder:150mV
S/N ratio (IHF-A correction)
Line straight on)
Phono: 90dB or more (5mV input)
Line: 106dB or more (input short-circuit)
Frequency characteristic
(Line straight on)
Phono: 20Hz-20kHz±0.5dB
Line: 100kHz [ 20Hz - ]-less than 3dB
Tone controlBass: ±6dB (100Hz)
Treble: ±6dB (10kHz)
Loudness control100Hz : +5dB (±1dB)
10kHz : +3dB (±1dB)
Power sourceAC100V, 50Hz/60Hz
Power consumption175W (Electrical Appliance and Material Control Law)
DimensionsWidth 467x height 151x depth of 439mm
Weight13.0kg
AdjunctWireless remote control
http://audio-database.com/LUXMANALPINE-LUXMAN/amp/l-501s-e.html

Luxman L-507S Integrated Amplifier

This Is Bigger Brother Of My Luxman L-505s :)



http://www.thevintageknob.org/luxman-L-507s.html

Specifications

Power output: 100 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 100kHz
Total harmonic distortion: 0.04%
Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 75dB (MC), 91dB (MM), 105dB (line)
Output: 150mV (line), 1V (Pre out)
Dimensions: 467 x 179 x 440mm
Weight: 18kg
http://www.hifiengine.com/manual_library/luxman/l-507s.shtml

Professional Turntable Commonwealth Electronics 12D


http://classicaudio.ru/forum/page/index.html/_/articles/proigryvatel-vinila-professional-turntable-com-r105

The Commonwealth Electronics 12D was the last model made by the company and following the take-over by Philips in the mid 1960's the 12D stayed in production till the 1970's. There were two versions of the 12D the 12/D3 and 12/D4 which had three and four speeds respectively. There is a neutal position between each speed selection which allows easy cueing. This turntable uses an idler wheel between the motor and the inside edge of the platter but unlike many turntables of this type a solenoid is used to engage the idler wheel while the power is on. This means that it is not possible for a flat to develop on the idler wheel if a particular speed is selected while the power is off.

SPECIFICATION:
Turnable diameter: 12in
Turnable weight: 6.5 lbs
Speeds: 33.33, 45.11, 77.93 RPM
Speed tolerance: 0% to +0.25%
Wow and flutter: Less than 0.1% RMS total @ 33 RPM
Rumble: Better than -50db below recorded level of 7cm/sec at 1 kHz
Acceleration: 1/2 rev @ 33.33 & 45 RPM, 3/4 rev @ 78 RPM

Tuesday 13 May 2014

Nakamichi 1000ZXL Limited Cassette Recorder





The highest peak cassette deck of the limited build-to-order model which carried out the flush up based on 1000ZXL, and was born.
All using parts are hardened with a custom product, and luxury is incorporated, so that futility can also be apparently thought also to the quality of the material and finish of a chassis or a fly wheel,Furthermore, a pure gold plating is given to the front panel and a thumb, and the cabinet of the rosewood finish which uses the thrust board of native wood etc. is made suitable at the custom-made model.

In the mechanism part, vibrational absorption capacity is heightened more because it will be in the status that aluminum was sandwiched, at the same time it performs a black alumite treatment to the top layer of the aluminum chassis which has a big damping characteristics to an oscillation and improves a corrosion resistant.
And what it was begun to delete from the brass round bar is adopted as a fly wheel, and the wow and flutter is further decreased with big moment of inertia and a high precision.

The head part has the discrete 3 head stream composition which can perform exact azimuth adjustment.
Furthermore, a pure gold plating is given to the shielding case of the recording head and the reproducing head, the overcurrent which stagnates on a top layer is decreased, and the visitor noise is suppressed. Thereby, the modulation by a low-pass noise is suppressed at the same time it raises an S/N ratio.

The corrosion resistant is further improved to the main chassis used as the whole frame by performing a black chromate treatment.

The heat sink of the power-source part has performed the gilding treatment to the copper plate excellent in thermal resistance, contact resistance, electric resistance, etc.
Moreover, all the connectors of a circuitry perform a gilding treatment and it is improving the corrosion resistant sharply.

A.B.L.E. By loading of a computer, the azimuth adjustment of the recording head, the sound-recording bias coordination, the sound-recording regeneration level coordination, and the sound-recording equalizer coordination are automated.

The automatic-music-selection system by code memory and the RAMM computer are carried.
An encryptation is to 15 points and a memory play special NetWare program is possible to 30 music.

The transport mechanism which adopted the frequency-dispersion type double capstan and the vibration braking type chassis is carried.

function-logic-diagram peak level meter and the 4-figure digital tape counter of level range 50dB (-40dB-+10dB) are carried.

L, R, the three-point microphone input of a blend (L+R), and the mixing circuitry of a source signal are carried.

Owner's own name was engraved in every set, and also the security period for five years was prepared.

By using optional RM-300, a remote control of the tapes operation of all includeds is possible in RAMM. 


http://audio-database.com/NAKAMICHI/player/1000zxllimited-e.html

Rare Midi Systems

                                                  Some Rare Midi Systems
                                         Pictures from good Russian site
                                    http://www.metal-vinyl.com/articles/522
 Hitachi MD5:


Aurex V30